Admixtures
Sikament 2002
Sikament® 2002 NS Imparts high workability and allows a large decrease in water content.
MYK SAVEMIX SP 111
MYK Savemix SP 111 is supplied as a brown liquid instantly dispersible in water MYK Savemix SP 111 has been specially formulated to give high water reductions up to 20% without loss of workability or to produce high quality concrete of reduced permeability.
Shotcrete-Gunite
Aliva-257
Aliva-257 is the universal machine for dry- and wet shotcrete application by thin-stream process. The new and very compact design of the machine impresses through its dimensions, weight and performance. With just 750 kg and dimensions as little as a small dry shotcrete machine, the Aliva-257 fits on every job site and is easy to install and operate.
Aliva-237
The Aliva-237 is a compact concrete spraying machine for dry-shotcrete as well as for small wet-shotcrete application of mortars. Automatic lubrication of the sealing gaskets is included. The integrated FU enables a infinitely variable speed of the rotor. With a conveying capacity from 0.4 to 4.0 m3/h, the Aliva-237 Shotcrete machine is suitable for each specific job.
Aliva-264
With the robust Aliva -264 with two speed motor, you can work with conveying capacities of up to 13m3/h. Its rubber sealing plates make it especially suitable for processing dry shotcrete and means that it can be used for slope stabilization, rock support, supporting excavation pits or embankments. Everywhere where large height differences must be overcome during shotcreting, the Aliva -264 is the ideal solution.
Mould Release-Cunng Compound
Sika-Form Oil
Sika-Form Oil is a carefully blended combination of refined emulsified mineral oil. When mixed with water at a recommended dilution, it produces a thin film of stable release agent.
Cera mould release
CERA MOULD RELEASE AGENT - M is an ideal and efficient material to be applied to the interiors of moulds / shutters to facilitate easy removal of shuttering or mould from hardened concrete.
Mortar Admixture
sika plastocrete plus
A concrete / mortar admixture in liquid form that acts both as a plasticizer and waterproofing compound.
MYK Shotcrete L
MYK SHOTCRETE I. is a chloride free accelerating admixture. It is supplied as a pale yellow solution which is introduced through the spraying nozzle.
Cementitious Mortar
Sikament 122 HS
SikaTop-122 HS is a pre-batched one component polymer modified repair mortar for hand and machine application.
Polymer Modified Mortar
Sika Latex Power
Sika Latex Power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.
Sika Raintite I
Sika Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.
Epoxy Adhesive,Grout and Mortar
Sikadur-31 C
Sikadur-31 C is solvent-free, thixotropic two part epoxy based adhesive for bonding Sikadur®-Combiflex® tape or Sikadur®-Hypalon strip to different substrates.
Sikadur-42 HES (IN)
Sikadur-42 HES (IN) is a three-component, high performance, high precision, low exothermic, pourable, and solvent-free, epoxy grouting system. For use at ambient temperatures between +20°C to +35ºC and on substrates from +20°C to +35ºC.
Structural Strengthening & Injection
Sika Injection-101 RC
Fast foaming, low viscous and solvent-free water-reactive polyurethane injection foam resin for temporary waterstopping. The material cures to a very dense hard-elastic foam with a very fine cellular structure. The reaction time of Sika® Injection-101 RC can be accelerated with Sika Injection-AC10.
MYK GROUT Inject E - 200
MYK Grout Inject E-200 is a two part epoxy resin system for grouting gaps ranging from 0.3 mm to 10 mm. It is a two part system consisting of a base and hardener.
Protective Coating & Impregnation
MYK Coat WPU-1K
MYK Coat WPU-1K is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing concrete surfaces. MYK Coat WPU-1K provides excellent resistance to moisture, water, and salts penetration into concrete and masonry surfaces.
Sika cool coating
Sika CoolCoat is a flexible, liquid applied, single component, ultra violet rays and weather resistant, acrylic waterproofing membrane for all types of exposed roof slabs(new and old),terraces(sloped and flat),etc.. Sika CoolCoat contains Cross-linking polymers, Special Glass Micro fibers, pigments and advanced antifungal additive that provides long lasting tough water proofing membrane. The low thermal conductivity of the membrane serves as insulation medium to resist heat transfer.
Floor Treatments and Toppings
Sikafloor - 81 EpoCem
Sikafloor-81 EpoCem is a 3-component epoxy modified cementitious self smoothening floor topping and moisture barrier.
MYK Coat EFG
MYK COAT EFG is a two-component solvent free epoxy resin system, comprising pigmented base and a hardener, specifically formulated to protect concrete and steel. On mixing of the two components, it yields a high build, chemical res istant protective coating, which cures to a semi glossy, ultra dense surface that is easily cleaned, hygienic and safe for contact with foodstuff and potable water.
Joint Sealing and Waterbars
Sikaswell S2
A one component, gun applied swellable sealant system, for fast application and suitable for use on rough surfaces. Also used as an adhesive for SikaSwell profiles.
Flexible waterproofing
SikaTop Seal 107
SikaTop Seal 107 is a two part acrylic polymer modified cementitious liquid applied waterproofing coating system. SikaTop Seal 107 should be used with suitable protection layer as a part of the waterproofing system
Brushbond
Brushbond provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness. Brushbond effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases. Brushbond is designed to re-face and even out variations in concrete and masonry surfaces.
Sikalastic-450 (I)
Sikalastic-450 (I) is a single-component; elastomeric, aliphatic polyurethane based cold liquid applied, high build, waterproof coating system. It cures to form an elastic, seamless, waterproof coating with good crack-bridging properties.
MYK Aquafin 2C
MYK Aquafin 2C is two component polymer modified highly flexible, crack bridging cementitious water proof coating. This product can resists water pressure upto 7 bars form positive side and also UV resistance.
MYK Aquafin 1C
MYK Aquafin IC is a single component Crystalline Waterproof coating. Cementitious, capillary active waterproofing slurry for the secure waterproofing of concrete substrates also against negative water pressure. External and internal waterproofing in cellars, lift pits, foundations, floor slabs etc.
Equipments
Grout pump
Grout pumps can be used to fill small voids and door jams and they are available in either manual, electric, gas, hydraulic and air powered. Concrete pumps are strong enough to lift up many stories and even lift slabs of concrete.
Inflatable Grout Packers
Inflatable packers are available in diameter sizes of 1″- 2″, 2″- 3″, 3″ – 4″, 3″- 6″, 4″- 7″ and 5″- 8″. Lengths range from 14″ up to five feet or more. With their sliding head design, they have the ability to double in size from their run-in diameter and typically furnish a longer seal than that of a mechanical packer. These packers have integral tube scrapers that remove excess grout that has adhered to the outside of the center tube and work each time the packer is deflated.